8
9
Connecting
EUPHONIA
AS2
Stereo signal
with full
frequency
content
Connecting the
AS2
subwoofer
Thanks to its active crossover network and numerous connection options, the
AS2
provides further advantages such as stepless variable phase. The
AS2
is con-
nected to a line signal either via 'Left/Right Input', 'Mono Input' or 'LFE Input'. It
is important that the level of the connected line signal is controlled together with
the equipment’s volume control.
Connection to stereo signal with full frequency content
If the subwoofer is connected to a pre-amplifi er without a built-in crossover net-
work of the same high quality as the
AS2
, we recommend that the subwoofer’s
'Left/Right Inputs' are connected to a signal with full frequency content from a
normal pre-amplifi er output. The subwoofer’s built-in crossover network takes
care of the necessary fi ltering.
Once the subwoofer’s 'Left/Right Inputs'
are connected to a stereo signal with full
frequency content, there is access to a high-
pass fi ltered signal (without the deep tones)
on the 'Left/Right Output' sockets. This
signal is connected to the power amplifi er
for the main speakers, which thus does not
need to handle the demanding deep tones.
This will always result in the main speakers
playing more cleanly and un-stressed.
