11
UK
DE
DK
CN
FR
remove the template and drill holes for insertion of saw or knife. Saw/cut carefully along the line
marked with pencil.
when the hole for the loudspeaker is made, make sure that the loudspeaker cable is not hanging
loose inside the wall. It must be securely fastened to the inside of the wall to prevent tension on
the cable when the cable is connected with the terminals of the loudspeaker. If left unsupported,
cable can gradually come loose, creating a poor electrical connection between wire and terminals
(see figure 6 for correct fastening of the cable).
when the loudspeaker cable is fastened and the hole for the loudspeaker is prepared, you are
ready to connect the speaker cables. connect cable to the terminals - being careful to connect
the amplifier’s red (+) terminal to the loudspeaker’s red (+) terminal and the amplifier’s black (-)
terminal to the loudspeaker’s black (-) terminal. Please refer to chapter 4.3 of this manual.
when the cables are connected, turn on the system and listen to the loudspeakers before final
mounting to make sure that all connections are correct. finally insert the loudspeaker in the wall
opening.
NOtE: Be careful not to touch the drivers during installation. when the loudspeaker is aligned,
tighten the screws in the loudspeaker brackets with a 3mm Allen key/bit so that the speaker is
firmly mounted in place. Be careful to avoid over-tightening the screws and shredding the threads.
7 . 0 r u N N I N g - I N
you should expect the sound quality from your new speakers to gradually improve during the first
period of use. Nothing particular has to be done in order to run in the speakers – but expect up
to 100 hours of playback (depending on playback level) before full performance level is reached.
8 . 0 M A g N E T I C S H I E L D I N g
the speaker drive units produce a magnetic field which may interfere with crt televisions/
monitors, hard drives, audio and video tapes as well as swipe cards etc. therefore keep such
items away from the speakers to avoid damage. LcD and plasma televisions/monitors are not
affected by magnetic fields.
9 . 0 M A I N T E N A N C E
cleaning the speaker surfaces can be done with ordinary household cleaning agents. Avoid using
products that are abrasive, or contain acid, alkali or anti-bacterial agents. Avoid using aerosols.
Avoid using cleaning agents directly on the drive units and clean them with extreme care,
particularly the tweeter. the grille may be cleaned using a vacuum cleaner or a normal clothes
brush.
1 0 . 0 E N V I r O N M E N T A L I N f O r M A T I O N A N D
D I S P O S A L
DALI products are designed to meet the international directives concerning restriction of Hazardous
Substances (roHS) and disposal of waste Electrical and Electronic Equipment (wEEE). the waste
symbol indicates that the speakers meet the directives (see figure 8). the speakers must be
processed or recycled appropriately. Please consult your local waste authority for guidance.
Autogoods “130”
130.com.ua
