5
10.
M3*5mm allen driver (8 pieces)
11.
M3 hex nut (6 pieces)
12.
six point sockets
1.3.2
Installation
Step 1.Go “main light FPC plug “and “LED light FPC plug” through “line cross hole “to around 12cm
Step 2.Put “expansion link” into “90 degree connector” as Picture2.
Step 3.Fix the vertical bar with the screw (do not mistake the direction), screw on the “M3 hex nut” and fix them as
Picture 3.
Step 4.Plug “LED light FPC plug (2PIN)”and “main light FPC plug (10PIN)”into the right place as Picture 4.
Step 5.Screw on the “90 degree connector” and “M3*5mm hexagon screwdriver” as Picture 5.
Step 6.Put on the “cover plate”, crew on the “M3*5mm hexagon screwdriver” and finish installation as Picture 6.
Picture
2 3
4 5
6
