DBH85 User Manual
Rev 1.0
5
4. Follow the operating instructions for your Bluetooth phone to start a pairing process.
5. Your phone’s display will indicate that it found one or more Bluetooth devices, the “dallab 85” should be
included in the list, please select it for pairing.
6. The phone’s display then prompts you for a pairing passkey or PIN, please enter four eights “8888”.
7. When the pairing process is finished successfully, the Headset blue LED will flash every 10 seconds.
8. Your phone’s display may ask you whether you want to change the Headset’s name; you can replace the
“Bluetooth Headset” with any name you may prefer.
If you have a Bluetooth phone that supports the
handsfree Bluetooth profile
, please refer to
Sophisticated features
section which includes features like Last Number Redial, Call Transfer,
Call Waiting etc.
Wearing and positioning the Headset
Once the Headset and your Bluetooth phone are paired
•
The headset can be used in both ears.
•
Position the headset properly on your ear and then release the speaker. Make sure that the speaker
fits well into your ear. At this stage it should be stable and comfortable.
•
Your headset is now ready to be used.
Answering/Ending a call
Answering a call.
After being paired with your cell phone, the Headset is ready to receive incoming calls without using the
phone. When there’s an incoming call, the Headset’s speaker will emit a melody tone and the blue LED
will flash, you can answer the incoming call by pressing
then speak normally.
Note:
If the phone rings first, wait until the Headset rings, then press the Headset button.
Ending a call.
You can use either of the ways to end a call:
1. Press the Headset’s
to end a call.
2. Press the phone’s keypad to end a call.
Making a call
There are two ways to make calls:
1. Using the phone’s keypad:
As general usage, dial the phone number you want to call by pressing the phone’s keypad.
2. Using the Voice Dialing through the Headset:
What is voice dialing?
Voice dialing is a feature on some Bluetooth phones which allows you to make calls by saying the name of
the person you want to call. The phone compares your voice with your previous recording (called a voice
tag). If they match then the phone will automatically dial the corresponding phone number. Not all
Bluetooth phones support voice dialing, please refer to your phone’s spec to make sure whether your phone
supports this feature.
