Evaluates: MAXQ3210
MAXQ3210 Evaluation Kit
______________________________________________
Maxim Integrated Products
1
For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at
1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.
Rev 0; 6/06
General Description
The MAXQ3210 evaluation kit (EV kit) is a proven plat-
form to conveniently evaluate the capabilities of the
MAXQ3210 voltage regulator microcontroller. The kit
contains the MAXQ3210 with pins brought out to head-
ers, JTAG programming interface, 9V battery clip,
piezoelectric horn, and pushbuttons and LEDs to con-
trol and display board operation. With the included
power supply, software, serial-to-JTAG interface board,
and an RS-232 cable connected to a personal comput-
er, the kit provides a completely functional system ideal
for evaluating the capabilities of the MAXQ3210.
♦
MAXQ3210 EV Kit Board with Processor and
3.57MHz Crystal Installed
♦
Serial-to-JTAG Interface Board and JTAG Cable
♦
MAXQ3210 Evaluation Kit CD-ROM
Features
♦
Easily Loads Code Using Bootstrap Loader and
Serial-to-JTAG Interface Board
♦
JTAG Interface Provides In-Application
Debugging Features
Step-by-Step Execution Tracing
Breakpointing by Code Address, Data Memory
Address, or Register Access
Data Memory View and Edit
♦
9V Battery Clip for Use with MAXQ3210 Voltage
Regulator
♦
Piezoelectric Horn with Optional Volume
Adjustment Jumpers
♦
Evaluation Kit Board can be Powered Directly
Over JTAG Interface
♦
Processor Clock can be run from Crystal or RC
Oscillator Circuit
♦
Direct LED Drive from Port Pin P0.7
♦
32-Step Digital Potentiometer for Experimenting
with On-Board Comparator
♦
Pushbutton Switches for Reset and Interrupt
Generation
♦
Prototyping Area Inc5V Rail and Ground
♦
Test/Expansion Header Includes All Device GPIO
and Piezoelectric Driver Pins
♦
Board Schematics Included to Provide a
Convenient Reference Design
Evaluation Kit Contents
Ordering Information
PART
DESCRIPTION
MAXQ3210-KIT
Evaluation Kit for MAXQ3210
SERIAL DEBUG PORT
JTAG INTERFACE
CABLE
RESET
INTERRUPT
SWITCH
MAXQ3210
LEDs
PIEZO HORN
9V BATTERY CONNECTOR
9V POWER CONNECTOR
JTAG INTERFACE BOARD
5V POWER CONNECTOR
Figure 1. MAXQ3210 Evaluation Kit Setup
MAXQ is a registered trademark of Maxim Integrated Products, Inc.