28
DAS-100/200
Dallmeier electronic GmbH & Co.KG
2. The module is inserted correctly when it has been fully slid in
and engaged.
NOTE
The front cover of the module must be flush with
the edge of the sub-rack housing.
3. Push down on the handle of the HDD module. Lock the module
using the key.
The re-establishment of the RAID system is started after the
new HDD module has been installed. This process may take
up to two days. The completion of the r-establishment process
is indicated on the DMS/DLS recorder or on PGuard by a
message.
4. The HDD module is ready for access when the blue
Drive ready LED is lit.
Fig. 7-6
Fig. 7-7
