DVE-4 / DVE-8 / DVE-16
www.dallmeier.com
15
Fig. 5-8
Repeat the previous step for additional areas if required.
Set the sensitivity of the motion detection with the Sensitivity slider if required (the
farther to the right the more sensitive).
Click
Save
.
With the “Clear All” button raised areas can be removed if required.
Arming Schedule
When the motion detection should be active, can be set to the
Arming Schedule
tab.
Select the
Arming Schedule
tab.
First, the motion detection is always active.
Fig. 5-9
Click
Edit
in order to configure a schedule for the motion detection.
