13
COMMISSIONING – IPS 10 000 | REV. 2.0.0 | © 2021 Dallmeier
•
Documentation
The product documentation for the device includes various documents
that are printed and/or provided in digital form, for example via the web-
site www.dallmeier.com.
Read the entire product documentation for the device carefully and com-
pletely before using the device. Always observe the instructions, notes
and warnings contained as well as the technical data in the currently
valid product specification. Keep all documents in a legible condition and
in a suitable place for future reference.
Regularly check the website www.dallmeier.com for possible updates to
the product documentation.
•
Condensation Water
If the device is brought from a cold to a warm environment, resulting
condensation water may cause malfunctions and damages.In this case,
wait (up to 8 hours) until the device has reached room temperature be-
fore commissioning.
•
Earthing & Equipotential Bonding
For the safety of persons (protection against dangerous contact voltages)
and devices (protection against over-voltages) as well as for the immuni-
ty of information and communication technology equipment to electro-
magnetic interferences (EMI), all protective measures, which are specified
by the currently valid DIN, VDE and ISO standards and which provide for
a standard-compliant earthing and a correct equipotential bonding of
electrical and electronic devices, are mandatory and must be fulfilled by
all means.
•
Lightning Storms
To avoid damage to the device by electrical surge during lightning storms,
all protective measures, which are specified by the currently valid DIN,
VDE and ISO standards and which provide for a standard-compliant
lightning protection equipotential bonding, are mandatory and must be
fulfilled by all means.
