MicroStreamer-PoE
www.dallmeier.com
33
Select the
Filename definition
:
•
Fi .jpg
The existing image will be overwritten.
•
Fi number (ring) + .jpg
The oldest image will be overwritten after a certain number of saved images (
Ringbuf-
fer size
).
•
Fi .jpg
Existing images will not be overwritten.
•
Fi date + .jpg
Existing images will not be overwritten.
If necessary, enter the
Ringbuffer size
.
Select
Encoder 2
or
Encoder 1
from the drop-down list
Image source
to define the
source of the live image which should be uploaded.
“Encoder 2” is deactivated by default. To attach the current live image of “Encoder 1” the
“Encoder mode > MJPEG” must be set (see section “
Click
Test
to test the FTP image upload.
9.2.2
Messages
Depending on the selected transfer protocol type, various alarm/event types can be set for
alarm/event messaging:
Select the
Messages
tab.
Fig. 9-5
Select all relevant messages which should be sent out by activating the related check-
box.
If necessary, set the
Interval
of FTP image uploads (see below).
Confirm with
OK
.
