MicroStreamer-PoE
www.dallmeier.com
24
Set the
Login mode
.
Confirm with
OK
.
8.4.2
User groups
The group names of the three user groups can be changed.
Note that,
• the factory default password of
Group 1: admin
is “
3
”.
• the factory default password of
Group 1: admin
must be changed for security reasons.
•
Group 2: user
and
Group 3: guest
are defined without a factory default password.
• a login of
Group 2: user
and
Group 3: guest
is only possible after a password is
defined.
Open the
User groups
dialogue via
Common settings
>
User management
>
User
groups ...
.
Fig. 8-7
Select the tab of the relevant group.
Set a new
Group name
if required.
Enter a
New password
.
Repeat the new password in the
Confirm password
field.
Finally confirm with
Apply
.
8.4.3
User
In the “User login” mode, individual users can be assigned to the three user groups.
8.4.3.1
Define a user
Ensure that the
Login mode
is set to
User login
.
Open the
User groups
dialogue via
Common settings
>
User management
>
User
groups ...
.
