WSD-2 HD
37
Dallmeier electronic
IMPORTANT
Ensure that the
Network settings
configuration group is not
sent to the modules.
To send the configuration file, first establish a connection to one of the receiving modules.
Ø
Log on and open the
Config File Management
dialogue via
Config File
>
Upload
.
Ø
Click on
Search
(
Durchsuchen
).
Ø
Select the relevant configuration file on your configuration PC.
Ø
Check the
Broadcast
checkbox.
Ø
Enter the first and last IP address of the relevant module group.
The configuration will be sent to all the IP addresses between
Start IP
and
Last IP
.
Ø
Enter the administrator password in the Password field and click on
OK
.
IMPORTANT
The password must be identical for all the modules. This is the
case with the default setting (password =
3
).
Fig. 10-4
After confirming by clicking on
OK
the transfer will be started. When it has finished, the
system will display a list of transferred (or skipped) configuration groups.
