WSD-2 HD
12
Dallmeier electronic
5 Installation and commissioning
5.1
Requirements at the installation side
Unfavorable local conditions may shorten the life of the product or lead to malfunctions.
Do not operate the
WSD-2 HD
at places:
l
with large scale dust and dirt
l
with steam or oil vapors (e.g. kitchen)
l
with direct sunlight
l
with unsuitable ambient temperatures (see technical data)
l
near sources of strong radiation, i.e. X-rays, radio transmitters or magnetic fields
l
with corrosive surroundings (e.g. gases or salt water)
l
with insufficient ventilation (e. g. closed cabinet)
5.2
Stand-alone Installation
The WSD-2 HD may be freely positioned in a place respecting the requirements mentioned
above.
Attention should be paid to the fact that all connections are freely accessible.
5.2.1
Requirements
Computer room
This device is not for use in a computer room as defined in the “Standard for Protection of
Electronic Computer/Data Processing Equipment, ANSI/NFPA 75”.
Secured room
Manipulation and sabotage danger. A stand-alone installation should be made in secured
rooms with restricted access only.
Socket-outlet
The used socket-outlet has to be installed near the device. It has to be easily accessible.
5.2.2
Installation
Ø
Do not place the device upside down.
Ø
Ensure a stable and horizontal surface.
Ø
Ensure sufficient ventilation with 4 inch free space on the front and back side.
