WSD-2 HD
21
Dallmeier electronic
7.6
Password
Ø
Open the
Change password
dialogue via
Common settings
>
Password ...
.
Fig. 7-9
Ø
Enter the the active password at
Current password
.
Ø
Enter the
New password
and confirm it.
Ø
Finally confirm with
OK
.
IMPORTANT
For security reasons the new password should consist of at least
8 characters. Do not use any conventional expressions or na-
mes, but instead use a combination of numbers and letters.
7.7
Fieldcontact display
The module can be made to write external data “to the track” by an external program or
device (using the DaVid protocol). For example, an automatic teller machine can send the
account number and sort code for a transaction.
The data for this field contact can be displayed in the image when the track is played back.
Which data are displayed and in what position on the screen can be defined in the
Field-
contact display
dialogues.
NOTE
The dialogues described here define the
display
of the fieldcon
-
tact data for playback at the evaluation station. The
recording
of the field contact data must be activated in the recording
settings.
7.7.1
Fieldcontact display filters
First of all decide which field contact data are relevant for the display.
Ø
Click on
Common settings
>
Fieldcontact display ...
>
Filter
.
