WSD-2 HD
30
Dallmeier electronic
Apply exceptions to the week timer
Fig. 8-18
Ø
Click on
OK
to apply this exceptions to the week timer.
8.2.2
Editing and copying
Editing
Open the
Alarm hosts
dialogue for the appropriate alarm host to edit the details.
Ø
Make the required changes and confirm them by clicking on
OK
.
Copying
The
Copy
function allows you to make a copy of all settings for another alarm host.
Ø
To copy the settings of an alarm host, click on the relevant alarm host in the selection
list.
Fig. 8-18
Ø
Open the
Settings
tab.
Ø
Click on
Copy ...
.
The name of the copied alarm host now appears in the alarm hosts selection list and in the
Name
field with the attribute (
1
) for “first copy“.
Ø
Change the
Name
and the
IP address
of the copied alarm host.
IMPORTANT
The IP address of the “new“ alarm host must be changed since
otherwise there will inevitably be network conflicts.
All of the settings that were made for the original alarm host under
Messages
and
Scheduler
apply to this new alarm host.
