WSD-2 HD
41
Dallmeier electronic
13 Cleaning and service
13.1
Cleaning
The system should be installed in an air-conditioned and duct-controlled server room. This
means that no cleaning is generally required.
If, nevertheless, cleaning is required, wipe the housing (outside) with a dry, anti-static
cloth.
IMPORTANT
Do not use cleansing agents or detergents.
Some cleansing agents and detergents contain solvents that
can damage the surface of your system.
13.2
Service
If you replace a hard disk that the module has identified as defective, the new disk must be
activated after the system has been started for the first time.
This activation procedure is carried out in the
HDD management
configuration dialogue. To
use this function, a so-called Day Password must be entered for security purposes. You can
obtain this from the Dallmeier Support Team by quoting the serial number of the module.
Fig. 13-1
Proceed as follows to activate the new hard disk:
Ø
Log on to the module using a browser.
Ø
Click on
Service
in the menu bar (on the left).
Ø
Enter the day password in the login dialogue.
The
HDD management
dialogue will appear:
Fig. 13-2
Ø
Activate the checkbox.
Ø
Click
OK
.
