FEATURES
Auto shut off. Auto calibration
Auto zero tracking and Auto backlight
Low battery indication and 8 mode conversion
Large LCD (6digits 15 mm high)
Large square stainless steel weighing tray
Net weight/stability indication
0.1 gram division with professional accuracy
PARTS DESCRIPTIONS
Side
AC adaptor
Socket
Top
Weighing platform: The arch face of platform is front, Correct the direction of the pan.
Protectors: Remove these before use
Display
ON/OFF key: Turns the scale Power on/off.
MODE key; Changes weighing units, g/oz/ozt/dwt/lb/gn/ct/n. ZERO key (for TARE): Sets display to zero
or Subtracts weight of a container.
Bottom
Battery compartment, Battery compartment cover, Batteries: Use 6 AA batteries
Zero indicator: Indicates when the scale zero is correct. Weighing unit
Stable indicator: Indicates when the reading is stable.
Low battery indicator
PREPARATION
Installing batteries/Connecting the AC adaptor
Remove the battery compartment and insert six Dry batteries(R6P/LR6/AA size) into the battery
compartment. Use extreme care that the polarities plus and minus are correct.
Plug the AC adapter to the AC adapter socket on the side. The AC input requirement could be
100,120,220,230 or 240Volts (50/60Hz) depending on the area where used, so please verify that the
adaptor is correct.
Setting up the i500
Caution:
Avoid placing the scale in direct sunlight, this may cause discoloration or malfunction. Place
your i500/i1200 on a firm weighing table so that the scale is level. (The scale will not perform accurately
when it is not level.) Make sure there are absolutely NO air currents or vibrations. They can cause
inaccurate readings.
