Dalsa C1240 User Manual Download

Page: 202 / 327

192

•

Operational Reference

Nano Series GigE Vision Camera

Important Usage Details

•

Two to 16 ROI areas are supported by the Genie Nano (4x4 matrix maximum).

•

For any selected ROI, the Offset X/Offset Y features define the upper left corner of the ROI.

•

Offset, Width, and Height features have individual increment values (step size) to consider.

•

The first ROI of any row sets the “height value” for any other ROI in that row.

•

The first ROI of any column sets the “width value” of any other ROI in that column.

•

Note that the Nano firmware by default provides a 4x4 sample multi-ROI setup for easy

verification of this function.

The following graphics show examples of the multi-ROI function (2x1 and 2x2 areas), the resultant

camera output and the constraints when configuring the ROI areas.

Example: Two Horizontal ROI Areas (2x1)

ROI (x1,y1)

ROI (x2,y1)

ROI (x1,y1)

ROI (x2,y1)

2 ROI Areas Defined

Camera Outputs only the 2 ROI Areas

•

Note that ROI(x1, y1) defines the height of any ROI in that row.

•

ROI(x2, y1) can have a different width.

•

The camera output image frame consists only of the two ROI areas. The user must account

for the change between ROI data for each output image row.

•

The output image being smaller reduces the bandwidth requirements.

Summary of Contents for C1240








































































































































































































































































































































Search results

Summary of Contents for C1240

Reviews:

Related manuals for C1240

Brands by name

Popular brands

Dalsa C1240, User Manual

Search results

Summary of Contents for C1240

Reviews:

Related manuals for C1240

Brands by name

Popular brands