34
•
Camera Performance and Features
Linea Lite GigE Series Camera
Output Line Details
The general purpose output line signals either dedicated or shared with inputs. See HD15 type
Connector Details for connector pinout and electrical information.
•
Feature Set:
(RW),
(RW),
LineSelector (RW),
(RW),
(RW),
(RO). See Output Signals
Electrical Specifications for more information.
•
External Outputs:
Can be used as a strobe signal to control lighting or to generate
programmable pulses when specific events are generated by the camera.
•
Output on Events:
Each output can be set independently to the available event modes defined
by the ‘
outputLineSource
’ feature. The output delay can be set from 0 to 16 seconds in
increments of 1 µs. The pulse duration can be set from 0 to 16 seconds in increments of 1 µs.
Example of Free Run Line Mode with Frame Trigger
An example setup of free run line acquisition with Frame Trigger and a configurable internal timer
is used as follows:
•
•
•
Select
•
•
Select
•
Setup Timer1:
•
•
•
Then click the CamExpert
Grab
button.
Example of Line Trigger Mode
An example setup of a Line Trigger acquisition using internal timer with a configurable internal
timer is as follows:
•
•
Select
•
•
Select
•
Setup Timestamp Modulo Event:
•
Use Timestamp Latch Cmd to start the timestamp using the camera’s internal clock
•
timeStampModulo= 10000 (frame rate = 100 Hz)
Then click the CamExpert
Grab
button.
Preliminary
