QuickCam User's Manual
62
03-032-10187-04
DALSA
corp.
Under
Test Pattern
:
2.
Select the video mode to use from the list in the
Camera
dropdown box or
the
Ethernet
dropdown box.
8.6 Troubleshooting: Using the Diagnostics
Tab
Communications and Verify Parameters
To quickly verify serial communications, check the Diagnostics tab.
Communication is working properly if the camera settings are properly
displayed in the
Camera Settings
section.
Verify Voltage
To check the camera’s input voltage, refer to the
Temperature/Voltage
section on
the
Diagnostics
tab. If it is within the proper range, the camera returns OK> and
the voltage value. Otherwise the camera returns an error message.
Verify Temperature
To check the internal temperature of the camera, refer to the
Temperature/Voltage
section on the
Diagnostics
tab. The camera will shut itself
down if the internal temperature exceeds 75°C.
Verify Signal Frequency
To verify the signal frequency, refer to the
Signal Frequency
section on the
Diagnostics
tab. Use the drop down list to select the control signal and review
the signal frequency. The control signals available for measuring are: CC1
(EXSYNC), CC2 (PRIN), CC3 (CCD Direction), and CC4 (Spare).
Summary of Contents for QuickCam
