82
Sapera LT
X64-AN Quad User's Manual
Run CamExpert, load or set camera timing parameters and capabilities, and then test a live grab.
Save the camera file for the default free run mode.
Use the JAI CV-A11 camera control tool to set the camera in alternative control modes such as
time integration or reduced vertical size-higher frame rate modes.
Configure CamExpert for the mode setup via the camera control tool. Test variations of these
other modes. Save new camera files for these modes when satisfied.
step 1: JAI CV-A11 in Free Run Mode
This section illustrates interfacing the JAI CV-A11 in free run mode.
Run the JAI camera control application. The factory defaults typically place the camera in free run
mode as shown in the following screen image. Note that this example used a camera with an adjustable
iris, thus the camera gain was set to manual. The JAI CV-A11 camera control tool can remain running.
Figure 42: JAI CV-A11 Camera Control Tool