Replacing the oven bulb
IMPORTANT: The oven must be disconnected from your
mains supply before you attempt to either remove or
replace the oven bulb.
o
Remove all oven shelves and the
enamelled baking tray.
o
Remove the light cover by turning it.
o
Unscrew the bulb and remove it from its
holder.
o
Replace the bulb with a 25W 300°C,
screw type pygmy.
o
Do not use any other type of bulb.
o
Place the lamp cover back into position.
Removing the oven door for cleaning
To facilitate the cleaning of the inside of the oven and the outer frame
of the oven, the door can be removed as follows:-
o
The hinges (A) have two movable latches on them (B).
o
If you raise both of the movable latches
(B), then the hinges (A) are released
from the oven housing.
21
o
You should grip the sides of the door at
the centre and then incline it slightly
towards the oven cavity and then pull the
door gently away from the oven cavity.
o
IMPORTANT: You should make sure that the door is supported
at all times and that you place the door on some padded
material whilst cleaning it.
o
The oven door and door glass should only be cleaned using a
damp cloth and a small amount of detergent. The cloth MUST
NOT have come into contact with any form of cleaning product
or chemical previously.
Summary of Contents for DAO68S
Page 2: ...2...
