ORIGIN BIT
16
Installation of basin mixer
1. Turn off the water system.
2. Attach a flexible connection to the mixer.
3. Important! Screw the flexible eyeliner into the body of the mixer only manually, without any tools and
excessive force to avoid damage.
4. Secure the mixer to the sanitary fixture using the supplied hardware.
5. Connect the flexible supply pipe to the water supply system: the right supply hose to the cold water
supply, and the left one - hot.
6. It is recommended to connect the mixer with the aerator removed (unscrewed) in order to avoid
clogging at the first water start.
7. Turn on the water supply system, check tightness of all connections when the mixer is closed. If
necessary, tighten and seal the connections.
8. Open hot and cold water supply for a while, then close water supply and install (twist) the aerator in place.
Installation of bath/shower mixer, bath and shower mixer with long spout
and shower set, and shower mixer
1. Turn off the water system. Screw eccentric adapters into the pipes of water supply system, having
previously sealed the threaded part with an insulating material. Select position of the eccentric adapters,
where they coincide and correspond to the connecting position of the mixer. The mixer should be placed
horizontally.
2. It is recommended to connect the mixer with the aerator removed (unscrewed) in order to avoid
clogging at the first start-up of water.
3. Install decorative sockets on the eccentric adapters and, using a tool with soft lining, attach the mixer
body. Screw the spout for the bath/shower mixer with long spout.
4. Turn on the water supply system, check tightness of all connections when the mixer is closed. If
necessary, tighten and seal the connections.
5. Open hot and cold water supply for a while, then close water supply and install (twist) the aerator in place.
6. For a bath/shower mixer with long spout and shower set, attach the shower head to the hose using
gaskets from the kit. Connect the hose to the shower outlet on the faucet body. Install the wall shower
holder in a place convenient for you.
Care recommendations
Modern plumbing equipment, kitchen and shower faucets are made of a variety of materials depending
on the functional features and design that are in demand in the market. To avoid damage when cleaning
take certain criteria into account.
Mixer care products
Cleaning agents are required to remove lime deposits.
Follow these rules during cleaning:
1. Never use products containing hydrochloric, formic or acetic acid, as they can cause significant damage.
2. For the same reasons, it is recommended to use phosphoric acid on a limited scale.
3. Never mix different cleaning products.
4. Never use abrasive cleaners or devices (for example, some cleaning powders and microfiber sponges).