Reference
Version
Document
Lang.
Page
244-ENG
09-01-2018
244 DAN DRYER Turbo (with nozzle)
Maintenance and service manual
ENG
8 of 12
DAN DRYER A/S • Tåsingevej 2 • DK-8940 Randers SV • Tel: +45 86 41 57 11 • Email: info@dandryer.dk
Cleaning the inside of the machine
13. Put the large rubber gasket back on top of the
motor.
15. Assemble the top of the fan housing onto the
bottom part by tightening the four screws. Be
careful not to overtighten. Fix angle bracket to
base plate of the motor
16. Reassemble hand dryer cover.
14. Reassemble the top half of the motor housing.
Make certain that motor wires are safely placed
in the protective groove.
Refit the cover
screws
17. Reconnect power supply and test run dryer.
Refit the cover
screws
