background image

KEY

RECORDING ON USB or SD

PANEL REMOTE

REC

1.  Recording takes place on connected USB or SD-media. Not included !
2. In 

AUX 

position recording starts by pressing REC on panel. 

3.  Signals from connected external sources will then be recorded in MP3 

format. (Example: Microphone connected to AVX15’s JACK-plug)

4.  For STOPPING the recording - press REC one more time.
5.  Choose relevant FUNCT when copying CD, CD-MP3/WMA to SD/USB, 

and start recording by pressing REC, which starts the copying.

6.  Recording is STOPPED by pressing REC one more time.

7.  NOTE: Input-signal should NOT exceed 800mV. - This means that 

recording from  a LOUDSPEAKER OUTPUT might cause damage.

X

DELETE

1.  Files on USB-Key or SD-Card can be deleted.
2.  Press DEL-key and use << FOLDER >> key  to choose FOLDER.
3.  A LONG press (1 sec.) << FOLDER >> will confirm selected folder.
4.  Press again << FOLDER >> and choose file for deleting.
5.  Once more pressing DEL will delete the chosen file.

6.  It’s highly recommended to delete files on a computer - It’s easier !!

X

REC/DEL
(by REMOTE)

1.  Follow same procedure as described under REC.
2. 

NOTE: Input-signal should NOT exceed 800mV. - This means that 
recording from  a LOUDSPEAKER OUTPUT might cause damage.

3.  When DELETING from REMOTE control, press REC/DEL for 1 sec. and 

the unit changes to DELETE mode. Then follow above DELETE instruc-
tions.

4.  It is still easier to do this on a computer !

X

Most important technical specifications:

Power Supply 

230-240V AC, 50 W max.

Microphone input 

2mV 200 Ohm 6,3 Jack 

Freq. Response 

20 - 20.000Hz 

MP3 / I-POD Connector

app. 150mV 3,5mm plug

Varispeed Range 

none

AUX input 

200mV 47Kohm  6,3mm Jack

Signal / Noise Ratio 

90dB

Closed Speaker system

6,5” Heavy Duty - Hi-Fi

Volume Control

ENCODER type (Remote)

Weight 

8,2 kg

Tone Controls

Separate Bass & Treble

Cassette Accesory:

Not Included !

External Speaker output 

6,3mm Mono Jack min. 8 Ohm

Frequency Response

60 - 12.500 Hz.

Master Headphone output
Relay Controlled

3,5mm Stereo Jack - breaks In-
ternal Loudspeaker

Tape Adj.

Normal Ferro Typ. 1

Headphone output 

7x 3,5mm Stereo Jack 8-32 Ohm

Size: HxWxD

14,0x21,0x10,0cm.

Weight:

App. 1,6 kg

PANEL

REMOTE

KEYS

DESCRIPTION of FUNCTION

PANEL REMOTE

PLAY/PAUSE

Load a CD. After reading CD-contend, pressing this key will start play-back.
Pressing one more time, the CD goes to PAUSE MODE.
In PAUSE mode, playback will restart after pressing one more time.

X

X

STOP

Press STOP to finish playback.

X

X

FUNCT

Pressing this key, you can choose medium to playback from. 

X

X

UP/CUE

In 

STOP position

:

Changes track in a forward cycle.
In 

PROGRAMMING mode

::

You can choose the track numbers for your program.

In playback- / Pause- / Playback Program- / Random mode:

ONE press jumps to next track (normal or programmed playback mode)
LONG press (app. 1 sec.) will start the CUE-FUNCTION (Fast playback)

X

X

DOWN/REW

In 

STOP position

:

Changes track in a reverse cycle.
In 

PROGRAMMING mode

::

You can choose the track numbers for your program.

In playback- / Pause- / Playback Program- / Random mode:

ONE press jumps to previous track (normal or programmed playback mode)
LONG press (app. 1 sec.) will start the REV-FUNCTION (Fast reverse playback)

X

X

FOLDER UP

In 

STOP position

:

Jumps from FIRST shown folder to NEXT folder - and to next - - 
In 

PLAYBACK

 mode: 

Jumps from playing folder, to first FILE in NEXT folder - jumps to next - - - .

X

X

FOLDER 
DOWN

In 

STOP position

:

Jumps from FIRST shown folder to LAST folder - and to next - - 
In 

PLAYBACK

 mode: 

Jumps from playing folder, to first FILE in PREVIOUS folder - jumps to next - - - .

X

X

REPEAT

In MP3 and USB plus MP3-CD mode:

ALL. - - - - PLAY ALL is ”normal” position without any repeat function.

I CD position 

(normal CD):

PLAY ALL is ”normal” position without any repeat function.

X

X

PROGRAM

Programming:
Press PROGRAM and select your track by pressing CUE/REV and then press 
again PROGRAM - select then next track and press PROGRAM - - and continue 
this way until you have finished creating your program.
After finishing programming, press PLAY - and your program will be played.
By pressing STOP, your program will be DELETED.

X

X

MUTE

Pressing MUTE during playback, the SOUND will break, but the playback contin-
ues in background. Once more pressed, the sound will return.

X

ESP 

In the CD-playback mode, ESP is turned on as standard. Display shows “ESP”. 
This is an electronic antishock position that helps the CD from “JUMPING”. 
ESP has a 40 sec. buffer, and includes a mechanical shock absorbing function.
Pressing ESP-key will turn off the function. This can help problems playing low-
quality home burned CD’s - but makes CD more sensitive for “jumping” 

X

DISPLAY

Pressing DISPLAY during playing MP3-CD you can call different information - 
provided the MP3 file contains this information. (ID3-TAG)

X

VOL.-

Decreases sound level 1dB (relative to 0-30dB) pr. step. MINIMUM is 0dB 

X

VOL.+

Increases the sound level 1dB (relative to 0-30dB) pr. step. MAXIMUM is 30dB 
(which is not an indication of the ACTUAL sound pressure)

X

EJECT

Press EJECT, and the CD will come out.

X

X

0-9

Keys for DIRECT selection of track.

X

FIND

In MP3 mode: Press once, and display change to FILE search. Only if 
CD/USB/SD contains the necessary information, search can be used to find title 
by pressing REV/CUE. Search is in alphabetic order. 

X

Reviews: