Installation Guide
CONFIDENTIAL
TG-0057_19 TM4 SUMO HD CO300-A1_A2_A2.5 Installation Guide
© Dana TM4 inc., 2013-2020
Page 11 of 42
2020-11-20
3 Receiving and unpacking the MCU
The TM4 MCU was carefully inspected and tested before being packed at our facilities; however we
recommend that you carry out a full visual inspection when unpacking as it is possible that the crate and
contents might become damaged during the shipping process.
3.1 Safety warnings related to handling the MCU
Read these general safety warnings before handling the product.
WARNING
Mishandling of this product may damage the product and/or cause injury or death.
•
All limitations and specifications communicated by TM4 regarding the product must be respected.
•
Do not attempt to open this product for repair; in case of damaged casing or suspected product
malfunction, contact TM4 Customer Service.
•
When using straps to lift the MCU, ensure they do not touch or put pressure on the connectors, and/or
cables.
•
Use only recommended points to secure the MCU.
3.2 Inspecting and moving the MCU
1
On receiving the MCU, immediately verify that the crate is undamaged; if you see signs of damage,
before signing for the package:
•
Inform the person delivering the package;
•
Make a note on the way bill and keep a copy;
•
Immediately contact TM4.
2
On opening the crate, perform a quick physical check of the contents:
•
Inspect for damaged packaging materials.
•
Verify that the MCU has remained in place in the crate during shipping.
•
Verify the contents of the crate against the list of delivered goods on the packing slip (a copy of
which is located inside the crate).
3
Carefully lift the MCU out of the crate using straps (this will require 2 people) or using the lifting points
indicated on the product interface drawing [10].
4
Remove all packaging materials before carrying out a full visual inspection of the MCU to ensure that it
is entirely to your satisfaction:
•
Inspect the MCU for cracks, scratches, broken parts, etc.
•
Verify that there are no loose external parts on the MCU.
Note
: If the packaging and/or the product are damaged, take photographs of the damage, save all
packaging materials and immediately notify the carrier as well as Customer Service at TM4. See Section 5
for TM4 contact information.
