background image

INTRODUCTION

Danaher has many years of experience designing and manufacturing linear actuators for a wide variety of applica-
tions on combines, school buses, industrial sweepers, vans for the handicapped, and other mobile applications. 
The Danaher linear actuator you have purchased is a well designed, high quality unit which will provide consistent, 
maintenance-free service throughout its life. When the Electrak 10 is mated with an MCS-2000 series control, it will 
provide controlled linear force for applications  which require moving, positioning, adjusting, or opening and closing 
on in-plant or mobile applications.

This manual provides complete information needed to install and troubleshoot Danaher D12-05B5, D12-20B5, D24-
05B5 and D24-20B5 DC linear actuators. All of these products are easy to apply and require no maintenance.

Please follow the instructions provided in this manual carefully to ensure safe, reliable operation. The Application 
Notes found on page 3 are of paramount importance, so be sure to read them care thoroughly before proceeding with 
installation. All stated or implied manufacturer’s warranties are voided if this product is not installed and operated in 
accordance with these instructions.

 

Description 

Page

 

Other Actuator Products .......................................................................................... 1

 

Application Notes .................................................................................................... 3

 

Specifications .......................................................................................................... 3

 

Mounting  ................................................................................................................. 4

 

Electrical Installation ................................................................................................ 5

 

Troubleshooting ....................................................................................................... 7

 

Dimensions .............................................................................................................. 8

TABLE OF CONTENTS

WARRANTy

Danaher warrants that it will repair or replace (whichever it deems 
advisable) any product manufactured and sold by it which proves 
to be defective in material or workmanship within a period of one (1) 
year from the date of original purchase for consumer, commercial 
or industrial use.
This  warranty  extends  only  to  the  original  purchaser  and  is  not 
transferable or assignable without Danaher’s prior consent.
Warranty  service  can  be  obtained  in  the  U.S.A.  by  returning 
any  defective  product,  transportation  charges  prepaid,  to  the 
appropriate Danaher factory.  Additional warranty information may 
be obtained by writing the Customer Service Department:

Danaher Motion

1300 N. State St.

Marengo, Il. 60152

Phone: 1-800-554-8466

A  purchase  receipt  or  other  proof  of  original  purchase  will  be 
required  before  warranty  service  is  rendered.  If  found  defective 
under the terms of this warranty, repair or replacement will be made, 
without charge, together with a refund for transportation costs. If 
found not to be defective, you will be notified and, without your 
consent, the item will be repaired or replaced and returned to you 
at your expense.
This warranty covers normal use and does not cover damage or 
defect which results from alteration, accident, neglect, or improper 
installation, operation, or maintenance. Some states do not allow 
limitation  on  how  long  an  implied  warrant  lasts,  so  the  above 
limitation may not apply to you.

Danaher’s obligation under this warranty is limited to the repair or 
replacement of the defective product and in no event shall Danaher 
be liable for consequential, indirect, or incidental damages of any 
kind incurred by reason of the manufacturer, sale or use of any 
defective product. Danaher neither assumes nor authorizes any 
other person to give any other warranty or to assume any other 
obligation or liability on its behalf.
WITH RESPECT TO CONSUMER USE OF THE PRODUCT, ANY 
IMPLIED  WARRANTIES  WHICH  THE  CONSUMER  MAY  HAVE 
ARE  LIMITED  IN  DURATION  TO  ONE  YEAR  FROM  THE  DATE 
OF  ORIGINAL  CONSUMER  PURCHASE.  WITH  RESPECT  TO 
COMMERCIAL AND INDUSTRIAL USES OF THE PRODUCT, THE 
FOREGOING  WARRANTY  IS  IN  LIEU  OF  AND  EXCLUDES  ALL 
OTHER  WARRANTIES,  WHETHER  EXPRESS  OR  IMPLIED  BY 
OPERATION OF LAW OR OTHERWISE, INCLUDING, BUT NOT 
LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY 
OR FITNESS.
Some states do not allow the exclusion or limitation of incidental or 
consequential damages, so the above limitation or exclusion may 
not apply to you. This warranty gives you specific legal rights and 
you may also have other rights which vary from state to state.

Summary of Contents for THOMSON D12-05B5













Reviews: