b. The Danapad will blink red and green to indicate that it is in pairing mode and awaiting user input.
Note
: The Danapad will time out and exit pairing mode after 60 seconds without user input.
c. Press
[1]
on the Danapad to perform pairing. A green light indicates success, while a red light indicates
failure.
Note
: The Danapad can perform pairing only when in proximity to the Danalock V3 while it is in pairing mode
(or any Danalock V3 in pairing mode if the Danapad is not yet connected to a Danalock V3).
d. After a successful pairing, the Danalock V3 and Danapad will both return to normal operation mode and will
not flash anymore.
To unpair a Danapad from a Danalock V3 Smart Lock:
1. Put the Danalock V3 into pairing mode.
a. Press the top button on the Danalock V3 with a pin or paperclip seven times and wait 5 seconds.
Updated: Sat, 11 Sep 2021 05:59:47 GMT
2
