Index
Remove the old thumb turn on your
door, but please keep the screws that
held it for later use.
In the box you will find 2 tailpiece
extenders for flat and square
tailpieces, making your danalock
fit most deadbolts.
Now fasten the baseplate
with the screws that original
ly held the thumb turn and
cylinder piece.
Important! The cylinder tailpiece have to align with the
door surface.
Extend the tailpiece with one of the two
extenders before you mount the baseplate. The tailpiece
extender should stick out 10 mm from the baseplate.
Click the lid off your danalock with your
nails, or loosen the lid by gently turning
a screwdriver in the slot at the rim of
the shell.
Place your danalock on the base, be
sure the cylinder tailpiece fits in the
center.
Fasten the 3 base-screws.
Click the lid back on. Now Your
danalock is now ready for use.
10 mm
align with
the door
surface
The danalock comes with batteries inserted, but a thin plastic folio
guarantee that your new danalock is fully charged. Remove the folio
and the danalock lits up with a green light for 5-10 seconds.
Loosen the 3 base-screws placed right underneath the
printed circuit board with a screwdriver.
Activate Auto unlock
Auto unlock is a
nice feature that
unlocks your door
automatically when
yournear your door.
danalock App:
Activate Auto unlock
24
Press on the menu icon at the top left
corner and the App settings to edit the
auto unlock settings.
Here you can choose between Auto
unlock and Knock to unlock. You can’t
have both features activated at the
same time.
A big button will appear at the bottom
of the Keychain page where you see all
your locks. To activate Auto unlock
you need to press the button:
The button will turn green, making it fast
and easy to switch this function on and
off as you please.
