V3-BT
Danalock V3-BT, Technical Manual v.1.5, May 2017
Page 13
Functionality check
LED signals
The V3 series is fitted with a LED that has the following status indications:
Status LED mode
LED color
Status indication
Constant blue till
finishes then one green
blink
Lock calibration
!
Constant red light till
finishes
Manually lock/unlock when not
calibrated
Constant yellow light till
finishes
Lock has been latched successfully
!
Constant yellow till fails
then one red blink
Lock failed during latch
Constant green light till
finishes
Lock has been unlatched successfully
!
Constant green till fails
then one red blink
Lock failed during unlatch
Constant white for 1 sec
Identification of the lock
!
Red light flashes every
5 minute
Critical battery level
LED