Danalock V3 US Easy install
Danalock V3 US Easy install
page 3/3
15. Complete setup
in the Danalock app
Your Danalock is now
attached to the door.
Download and open
the Danalock app to
finish setting it up.
Leave the door open,
so the lock isn’t
influenced when
calibrated.
Open the Danalock app you
downloaded at the start. When you
have logged in you will see your
empty keychain. Press ”Add lock” at
the bottom of the screen.
A guide will now lead you through
the installation and configuration
of your Danalock.
16. Download the Danalock App
If at any time you need to dismount
the Danalock from your door, insert
a pen tip into the hole at the top
inner edge of the lock and press
while turning the lock counter-
clockwise until the lock releases.
This will not reset the lock or
disconnect it from your account,
but the lock may need to be
re-calibrated if fastened to
your door again.
17. Dismount instructions
Add lock
Settings
Lock user
s
Log
Menu
You have no k
eys
Add your fir
st lock
by pressing the
”Add lock” icon
below