23
Clicks
Color
Activity
1
Green
Inclusion mode
This mode is used to in- or exclude your Danalock with a Z-Wave or Zigbee gateway.
When the Danalock blinks green it is in ex/inclusion mode and you have 30 seconds to
pair the Danalock with a gateway.
2
Yellow
Manual calibration
Turn the Danalock to the desired unlocked position. Start the calibration with the
click command and wait for the LED to start blinking yellow. Turn the Danalock to the
desired locked position while the LED blinks and click the button once to save the
locked position. If the lock doesn’t receive a response from you within 30 seconds the
calibration will be canceled.
3
White
Auto calibration
Turn the Danalock to unlocked position and lift the handle if needed. Leave the door
open while the Danalock auto calibrates. Start the auto calibration with the click
command. The Danalock will blink white while auto calibrating.
7
Cancel
10
Red
Reset user settings
This action deletes all user settings on the Danalock. The Danalock responds by
blinking red.
