Danatronics, Corp.
14
the left arrow key will select parameters in a counter clockwise direction. Red-circled
parameters, shown below, will be editable. This screen also represents the default screen
because it allows full instrument operation while showing the largest A-scan. This screen
will appear 10 seconds after the
Parameter
screen is displayed upon powering on the
unit. To change the Display mode, simply press the
F4
– DISP MD
key.
Color Waveform in Echo-to-Echo mode, filename, ID, thickness value, gain, rectification, battery
life, alarm, freeze, backlight, and display mode.
Press the left or right arrow key to activate the Parameter Edit mode. Once active, you
can scroll through the list using the left or right arrow key and then use the up and down
arrow keys to make adjustments. When finished, press the
F1 – Done
key to end editing
or the
F4
key to select the next set of parameters. The list will toggle the right side
parameter list in following order: