5
DOOR REVERSAL INSTRUCTIONS
If the appliance is placed on its back or side for any
length of time during this process, it must be allowed
to remain upright for 6 hours before plugging it in
to avoid damage to the internal components.
1. Remove the screw hole covers from the worktop
and then remove the screws and the worktop.
Move the hinge hole cover from one side of the
worktop to the other. See fi gure 1.
2. Remove the screws from the upper hinge and
remove the door from the cabinet. Remove the
door spindle from the upper hinge. Move the
door hinge hole cover from one side of the door
to the other. See fi gure 2.
3. Remove the adjustable foot and the three screws
holding the bottom hinge. Move the bottom
hinge to the left side of the chassis and install
with the screws. Install the adjustable foot on the
left side of the appliance and move the solid foot
to the right side of the appliance. See fi gure 3.
4. The upper left hinge is in the accessory bag
inside the appliance. Install the door spindle on
the upper left hinge. Install the upper left hinge
and door onto the chassis. Reinstall the worktop.
See fi gure 4.
Note:
When reinstalling the door, ensure that the
top of the door is level with the top of the cabinet
and that the rubber gasket makes a good seal with
the cabinet all the way around.
A. Worktop Hinge Hole Cover
B. Worktop
C. Screw Hole Cover
D. Door Spindle
E. Upper Hinge
F. Door Hinge Hole Cover
G. Adjustable Foot
H. Lower Hinge
1
2
3
4
OPERATING INSTRUCTIONS
