Operating Instructions
USING THE REMOTE
CONTROLLER
BUTTONS
1
ON/OFF
MODE
TEMP
UP
TEMP
DOWN
SWING
TIMER
SLEEP
FAN
SWING OPERATION
Use the SWING button to adjust the
Left/Right airflow direction.
1)
Press this button while the unit is
operational, the vertical louvers
automatically swing right and left
sweeping the cold/hot air alternately to
obtain comfortable cooling/heating.
2)
Press the SWING button again to stop
the swing operation.
1
ON/OFF
MODE
TEMP
UP
TEMP
DOWN
ENERGY
TIMER
CLEAN
AIR
SLEEP
S
SAVER
FAN
SLEEP OPERATION
• In this mode, the selected temperature
will increase(in cooling mode) / decrease
(in heating mode) by 2°F 30 minutes after
the mode is selected.
• The temperature will then increase by
another 2°F after an additional 30
minutes.
• This new temperature will be maintained
for 7 hours before it returns to the
originally selected temperature. This ends
the Sleep mode and the unit will continue
to operate as originally programmed.
• The Sleep mode program can be
cancelled at any time during operation
by again pressing the Sleep button.
1
ON/OFF
MODE
TEMP
UP
TEMP
DOWN
ENERGY
TIMER
CLEAN
AIR
SLEEP
S
SAVER
FAN
TIMER OPERATION
press the TIMER button can set the Auto-
start and Auto-stop time of the unit.
NOTE:
• To set Auto-start time, the unit must be in
the OFF position.
• To set Auto-stop time, the unit must be in
the ON postion.
To set the Auto-start time.
1.
Push the TIMER button when the unit is
off, only the Auto-start feature can be set.
2.
Keep pressing the TIMER button, each
press will increase the selected time by
1 hour increments, up to 12 hours.
3.
The time can be set in a range of 0~12
hours.
4.
After the desired time has established,
wait for about 10 seconds until the
setting temperature reverts back in the
display window of the air conditioner.
This indicates the program is set.
12
