6
OPERATING INSTRUCTIONS
DOOR REVERSAL INSTRUCTIONS
If the appliance is placed on its back or side for any length of time
during this process, it must be allowed to remain upright for 6 hours
before plugging it in to avoid damage to the internal components.
1. Remove the hinge cover from the top right side of the cabinet.
Remove the screw hole covers from the top left side of the
cabinet.
2. Remove the door spindle cover that covers the hinge hole on
the top left side of the door. Remove the hole cover from the top
right side of the door. Removing the hole cover may require a
fl at bladed screwdriver.
3. Remove the upper hinge and upper hinge gasket from the top
right side of the cabinet. Remove the door from the cabinet.
4. Move the stop block from the bottom right side of the door to the
bottom left side of the door. Move the door handle to the right
side of the door. Move the screw hole covers from the right side
of the door to the left side of the door.
5. Remove the adjustable foot and the lower hinge from the bottom
right side of the cabinet. Remove the solid foot and screws from
the bottom left side of the cabinet. Install the solid foot on the
bottom right side of the cabinet. Install the lower hinge and
adjustable foot on the lower left side of the cabinet.
6. Remove the hinge pin from the upper hinge. Flip the hinge over
and reinstall the hinge pin on the other side.
7. Install the door onto the cabinet. Install the upper hinge and
upper hinge gasket.
8. Install the hole cover on the top left side of the door. Take the
door spindle cover from the accessory bag and install it on the
top right side of the door.
9. Install the upper hinge cover on the top left side of the door.
Install the screw hole covers on the top right side of the door.
Note:
When reinstalling the door, ensure that the top of the door is
level with the top of the cabinet and that the rubber gasket makes a
good seal with the cabinet all the way around.
1
2
3
4
5
6
7
8
9
