10
OPERATING INSTRUCTIONS
DOOR REVERSAL INSTRUCTIONS
If the appliance is placed on its back or side for any length of time
during this process, it must be allowed to remain upright for 6 hours
before plugging it in to avoid damage to the internal components.
1. Remove the hinge cover from the top right side of the cabinet.
Remove the screw hole covers from the top left side of the cabinet.
2. Remove the door spindle cover that covers the hinge hole on the
top left side of the door. Remove the hole cover from the top right
side of the door. Removing the hole cover may require a fl at bladed
screwdriver.
3. Remove the upper hinge and upper hinge gasket from the top right
side of the cabinet. Remove the door from the cabinet.
4. Move the stop block from the bottom right side of the door to the
bottom left side of the door. Move the door handle to the right side of
the door. Move the screw hole covers from the right side of the door
to the left side of the door.
5. Remove the adjustable foot and the lower hinge from the bottom right
side of the cabinet. Remove the solid foot and screws from the bottom
left side of the cabinet. Install the solid foot on the bottom right side of
the cabinet. Install the lower hinge and adjustable foot on the lower
left side of the cabinet.
6. Remove the hinge pin from the upper hinge. Flip the hinge over and
reinstall the hinge pin on the other side.
7. Install the door onto the cabinet. Install the upper hinge and upper
hinge gasket.
8. Install the hole cover on the top left side of the door. Take the door
spindle cover from the accessory bag and install it on the top right
side of the door.
9. Install the upper hinge cover on the top left side of the door. Install the
screw hole covers on the top right side of the door.
Note:
When reinstalling the door, ensure that the top of the door is level
with the top of the cabinet and that the rubber gasket makes a good seal
with the cabinet all the way around.
