OPERATING INSTRUCTIONS
7
CASTER INSTALLATION
To reduce the risk of personal injury or property damage, we
recommend unplugging the appliance and using two people to complete
the caster installation.
1. Place the appliance on its back. Protect the fl oor and the back of the
unit from damage by laying the appliance on a towel or blanket.
2. Remove the three solid feet. Unscrew the adjustable foot. Keep the
solid feet and adjustable foot for future use.
3. Install the non-locking casters on the back of the appliance where the
mounting holes are already pre-drilled and threaded.
4. Install the larger locking caster at the front of the appliance opposite
the hinge.
5. Remove the hinge plate installed on the appliance and replace it with
the hinge plate provided in the caster box.
6. Use the spanner provided in the caster box to install the smaller
locking caster into the pre-drilled hole in the caster hinge plate.
7. Once completed, allow the unit to stand upright for a minimum of 6
hours before plugging in to avoid damage to internal components.
A
B
C
A
A
D
E
F
G
A. Solid feet
B. Adjustable foot
C. Adjustable foot hinge plate
D. Non-locking casters
E. Larger locking caster
F. Caster hinge plate
G. Smaller locking caster
