Installation Instructions
DOOR REVERSAL
INSTRUCTIONS
Figure 5
Figure 6
Figure 7
Move the door bushing (shown on the right in Figure 5) to the left, and the
5
plastic hole cover (shown on the left in Figure 5) to the right.
Move the door stopper located on the right side of the door to the left side as
6
shown in Figure 6. If your unit has 2 pre-installed door stops, one on each side,
this step is not necessary. Install the door onto the lower hinge located on the left
side.
Install the upper hinge and hinge cover on the left side. Place the plas-
7
tic hole covers in the holes on the right side of the top of the refrigerator.
Features
THERMOSTAT DIAL:
For controlling the temperature
1
inside the refrigerator; the compressor activates as
soon as the temperature rises above the desired level.
FREEZER COMPARTMENT WITH FREEZER DOOR:
2
Separate freezer section can hold small items.
WIRE SHELF
3
DRIP TRAY:
Catches the water that drips off the
4
evaporator when defrosting.
MAGNETIC GASKET:
Tight fitting door seal keeps all
5
the cooling power locked inside. No hooks or latches.
BOTTLE RACKS:
For tall, small and medium cans or
6
jars.
LEVELING LEGS:
Adjust so the unit is leveled
7
on the surface.
1
2
3
5
6
7
4
6
