Extension Cord Precautions:
Because of potential safety hazards under certain conditions, we strongly recommend against the use of any extension cord.
However, if you still elect to use an extension cord, it is absolutely necessary that it be a UL listed 3-wire grounding type
appliance extension cord and that the current carrying rating of the cord in amperes be equivalent to or greater than the
branch circuit rating.
WARNING
PLEASE READ CAREFULLY. For personal safety, this product must be properly grounded.
Grounding Instructions
The power cord of this appliance is equipped with a 3-prong (grounding) plug that mates with a standard 3-prong grounding
wall receptacle to minimize the possibility of electric shock hazard from this appliance. The customer should have the wall
receptacle and circuit checked by a qualified electrician to make sure the receptacle is properly grounded and polarized.
Preferred Method
Where a standard 2-prong wall receptacle is encountered, it is the personal
responsibility and obligation of the customer to have it replaced with a properly
grounded 3-prong wall receptacle.
DO NOT, UNDER ANY CIRCUMSTANCE, CUT OR REMOVE THE THIRD (GROUND)
PRONG FROM THE POWER CORD.
OPERATION OF SURFACE BURNERS
8. Installation of Burner Cap Assembly
Your range is equipped with a combination of the sealed burner. Be sure to place the correct burner cap at on all 4 or 6 surface
burner locations:
•
Install the surface burner heads
•
Install the surface burner caps
•
Install the burner grates
Rapid
Burner
3.0 Kw
Semi-rapid
Burner
1.75 Kw
Rapid
Burner
3.0 Kw
Burner
1.75 Kw
Surface Burner Configuration
Electrode
Surface Burner
Heat
Surface Burner
Cap
Surface Burner
Grate
