DOOR REVERSAL INSTRUCTIONS
If the appliance is placed on its back or side for any
length of time during this process, it must be allowed
to remain upright for 6 hours before plugging it in
to avoid damage to the internal components.
1. Remove hinge cover and the upper hinge from
the top right side of the cabinet. Remove the
door from the cabinet.
2. Remove the screw hole cover from the top left
side of the cabinet and install it on the top right
side of the cabinet.
3. Remove the hinge hole cover from the top left
side of the door and place it in the hole on the
top right side of the door.
4. Remove the door stopper from the bottom right
side of the door. Find the left side door stopper
in the accessory bag and install it on the bottom
left side of the door.
5. Remove the lower hinge from the bottom right
side of the cabinet. Remove the hinge pin from
the hinge. Turn the hinge over and replace the
hinge pin.
6. Install the lower hinge on the bottom left side of
the cabinet.
7. Remove the rubber gasket from the door, rotate
it 180° and reinstall it. Install the door on the
cabinet.
8. Install the upper hinge on the top left side of the
cabinet. Ensure that the top of the door is level
with the top of the cabinet and that the rubber
gasket is making a good seal with the cabinet
all the way around before tightening the upper
hinge screws. Install the hinge cover.
OPERATING INSTRUCTIONS
4
1
2
3
5
6
7
8
4
