Danby DWM060WDB, Owner'S Manual

OPERATING INSTRUCTIONS

PROGRAM SELECTION

Press the 

Program/Delay

 button repeatedly to 

choose the desired program. 

Consult the table below for information on program 

times.

Note:

 Program times can vary based on the amount 

of clothing in the washing machine and the water 

pressure going into the inlet hose.

Program 

Code

Cycle Name

Max Cycle 

Duration

01

Auto Wash

43 minutes

02

Normal

33 minutes

03

Heavy

43 minutes

04

Quick

15 minutes

05

Soak

63 minutes

06

Delicate

43 minutes

07

Wash Only

14 minutes

08

Rinse and Spin

29 minutes

09

Spin Only

9 minutes

10

Super Spin

19 minutes

11

No Spin

32 minutes

• Press 

the 

Water Level

 button to choose the size 

of wash load that will be completed.

• Press 

the 

Water Supply

 button to choose the 

desired water temperature.

•  Close the lid and press the 

Start/Pause

 button to 

begin the desired program.

•  A program can be paused once it is in 

operation by pressing the 

Start/Pause

 button.

•  If the load is unbalanced, and the safety switch 

is triggered during spinning, the machine will 

automatically refi ll with water to adjust the 

balance.

•  The appliance will not operate if the lid is open.

•  When a program is fi nished, an alarm will 

sound.

•  To reduce the risk of electric shock and water 

leaking, disconnect the water inlet hose and the 

power cord when the appliance is not in use.

DELAY FUNCTION

Choose a program by pressing the 

Program/Delay

button. Press the 

Start/Pause

 button. The appliance 

will chime for 3 seconds. While the appliance is 

chiming, keep pressing the 

Program/Delay

 button 

until the desired delay time is displayed. 

For example, to delay the program for 5 hours, 

press the 

Program/Delay

 button until the display 

shows “05.”

MUTE FUNCTION

To mute all sounds from the appliance, press the 

Power

 button and the display will show “00,” press 

and hold the 

Start/Pause

 button for 1-2 seconds to 

activate the mute function. To deactivate the mute 

function, press the 

Start/Pause

 button.

AUTOMATIC POWER OFF FUNCTION

If the washing machine is turned on and no 

program is selected within 10 minutes, the 

appliance will automatically power off to conserve 

energy.

Once a wash program is complete, a buzzer will 

sound six times to alert that the program is fi nished 

and the appliance will automatically power off to 

conserve energy.

8