4
INSTALLATION INSTRUCTIONS
B
A
INSTALLATION
There are two methods that can be used to install the Parcel Guard depending on what installation location
is available. Decide which option is best for your chosen location and follow the steps below.
A. Secured through the bottom
1. Remove the platform at the bottom of the Parcel Guard. Two holes are pre-drilled in the bottom of the
cabinet.
2. Place the Parcel Guard on the fl oor or structure that it will be secured to.
3. Use a pen or pencil to mark the hole locations through the pre-drilled holes.
4. Move the Parcel Guard out of the way and then use a power drill and a 1/4” drill bit to create guide
holes for the bolts or screws, at least 2.5” deep for wood screws and at least 3.75” deep for concrete
bolts.
5. Replace the Parcel Guard and insert the wood screws or concrete bolts with washers into the holes. Use
a wrench to tighten the wood screw. Tighten the nut on the concrete bolts and the sleeves will expand to
secure the bolt.