Technical certificate «ARROW»
3
Operation rules
Before assembling please check to ensure all parts shown in the supply set have been
received. When installing the greenhouse or using a third party, the buyer should check
the assembly quality to ensure compliance with the assembly manual instructions.
Install the greenhouse at least 2 metres from buildings and at least 2 metres from the
canopy of trees.
The greenhouse is designed to withstand the wind speed no more than 24 m/sec.
In winter, coverage of greenhouse should not be removed provided that snow load is limited.
Should greenhouse be unattended all winter period, buyer should either remove the
coverage or estimate possible snow load. Ultimate load for the frame having complete box with
installed drawbars and side braces appears under 450 kg snow cover per 1 m
2
of
horizontal ground surface corresponding to 2.25 m fresh snow layer or 1.1 m packed snow
layer.
Cleaning and washing polycarbonate panels
1.
Rinse the panel with warm water.
2.
Wash the panel with a mild soap solution or household detergent and warm water, using a
soft cloth or sponge to remove dirt.
3.
Rinse with cold water and wipe with a soft cloth.
Do not use abrasives or highly alkaline cleaning agents to clean polycarbonate panels.
Dry wiping of the surface will damage the protective layer of the glazing and shorten its
effective life. Do not rub the surface of polycarbonate panels with brushes, metallic fabric
or other abrasive materials. When disinfecting a greenhouse from pathogens of fungal
and bacterial diseases, do not apply sulfur candles to avoid corrosion of the frame.
Warranty liabilities
Claim submission period is 24 months from the date of purchase. Warranty does not apply to
cases if:
1.
Installation of the structure in violation of the requirements of the instructions.
2.
Violation of the operating rules.
3.
Misuse of the structure.
4.
The presence of corrosion traces on the cutoffs of parts, because this does not affect
the performance of the structure.
5.
Greenhouse deformations due to excess of snow load stated in the technical certificate
of the greenhouse.
6.
Greenhouse deformations due to soil movement.
7.
Floods, hurricanes, and other natural disasters.
