Dancover LOTOS, Manual

2

TECHNICAL CERTIFICATE/MINI GREENHOUSE “LOTOS”

Description

«LOTOS» hotbed is designed to create a climate favorable for the cultivation of horticultural crops 

on farmlands.

Hotbed frame is made of galvanized steel tubes. Assembly is carried out using screws
and nuts. Supply scope includes all the parts required to fix the cladding.
Hotbed cladding can be included in supply scope at the customer’s request. Each set requires 1 

2,1х3m polycarbonate sheet of 4 mm thickness.

The  assembly  and  operation  of  the  «LOTOS»  hotbed  shall  be  carried  out 
strictly  in  accordance  with  the  instruction  manual  and  the  operating  rules 
laid down in the data sheet. Technical data sheet shall be kept.

!

Operation rules

before using, the hotbed should be assemblied and installed in accordance with instructions. If 

the hotbed is installed by third parties, customer should check the assembling quality for compliance 
with the instructions.

Do not install a hotbed near the buildings and trees from which snow or
ice can fall. Keep the recommended distance of not less than 2 m. Hotbed is designed to withstand 

the wind not more than 24 m/s.

There is no need to remove horbed cladding for the winter period, but it is necessary to leave the 

hotbed open, with inner cover slided under the outer one