background image

 

1

ASSEMBLY AND OPERATION INSTRUCTIONS

 

                           

WARNING

Read this instruction before using this appliance. The 
appliance  must  be  installed  in  accordance  with  the 
instructions  and  local  regulations.  The  use  of  this 
appliance  in  enclosed  areas  can  be  dangerous  and  is 
PROHIBITED.

 

 

                       

 Do the leak test after each changing LPG cylinder.   

 Never check for leaks with a match or open flame   

  Do  not  store  or  use  gasoline  or  other  flammable 

vapors and liquids in the vicinity of this appliance.   

 

 

IF YOU SMELL GAS

 Close the valve of the gas cylinder or regulator.   

  Extinguish  all  naked  flames;  do  not  operate  any 

electrical appliances   

 Check for leaks as detailed in this instructions 

  If  odor  persists,  contact  your  dealer  or  gas  supplier 

immediately   

 
 
 
 

 
 
 
 
 
 

DO NOT USE THE HEATER WHEN IT IS RAINING AND DO NOT LET ANY LIQUID 

COME INTO CONTACT WITH THE GLASS TUBE WHEN THE HEATER IS IN USE. 

FOR OUTDOOR USE ONLY. 

KEEP THE INSTRUCTIONS FOR FUTURE REFERENCE 

PH08-SSA Pyramid Heater

Summary of Contents for PH08-SSA













Reviews: