5
Operation:
1. Place the heater on a firm level surface free from obstructions and at least 3 feet
away from any wall or combustible materials.
2. With the selector knob in the OFF position, plug the heater into the main supply.
3. Turn the control knob to either (Low) for 300 Watt or (High) for 600 Watt.
4. Turn the control knob fully to the (Osc) position to activate the oscillation feature.
5. Turn the selector knob to the OFF position and unplug the unit when you have
finished using it.
Other Features:
The heater is equipped with a safety tilt switch which automatically shuts off the
heater element if the heater is not in the upright position, the heater will resume back
to normal when the heater is returned to the upright position.
If your heater fails to operate:
1. Be sure the unit is plugged into the power supply and that the electrical outlet is in
working order:
2. Check for obstructions.
3. If you find any obstruction, turn the heater OFF, unplug the unit from the power
supply and wait for it to cool down, carefully remove the obstruction, plug the
heater into the power supply and restart the unit as described in the Operation
guide.
4. If the defect persists, remove the plug from the power point and consult an
authorized electrical company.
