SL-Series rigging components
3.10 Z5707 SL Aiming plate
Please verify the shipment for completeness and proper condition
of the items.
The Z5707 Aiming plate is equipped and supplied with the
following rigging components:
Pos. Component
Description
[1]
Z5707 SL
Aiming plate
The Z5707 SL Aiming plate is
constructed from high grade steel with
a dead weight of 13.5 kg (29.8 lb).
It is used for the horizontal aiming of
an entire array using two motor hoists.
With a chain hoist distance of
minimum 0.6 m (2 ft), preferably
approx 1 m (3 ft), the SL Aiming plate
provides a horizontal angle range of
±
15° (first and last pick holes of the
load beam used).
[2]
Two 4.75 t shackles are provided to
allow direct connection to the motor
hoist hooks or to attach the Z5706
Hoist connector chain.
[3]
Load hook for attachment to the 4.75 t
shackle of the corresponding SL-Series
load beam or applicable d&b flying
frame.
3.10.1 Dimensional drawing
Z5707 SL Aiming plate dimensions in mm [inch]
d&b SL-Series Rigging manual 1.10 en
27
