SL-Series rigging components
3.16.2 E7492 Touring cart SL-SUB/SL-GSUB
Pos. Component
Description
[1]
E7492
Touring cart 3 x SL-SUB/SL-GSUB
Dead weight: 44 kg (97 lb).
Total weight: 458 kg ( 1010 lb),
3 x SUB cabinet.
Dimensions:
H x W x D (cm) 200 x 140 x 116
H x W x D (inch) 79 x 55 x 46
[2]
Two slots at the rear acting as guide
rails for the wheels of the first cabinet.
[3]
Recesses that accept the runners at the
bottom panel of the cabinet.
[4]
Four heavy duty brake wheels
125 x 40 mm.
Touring cart instruction label providing
vital safety and rigging instructions.
Altering the wheel position
Two wheels of the cart can be slightly moved to the inner of the
cart tray to reduce the track width from approx.: 90 cm (3 ft) to
80 cm (2.5 ft).
The wheels are fixed using M8 x 20 mm, grade 8.8 locking screws
and self-locking nuts M8.
To alter the position, proceed as follows:
Tools required: Torque wrench size #13 (1/2" AF).
1. Slacken and undo the four self-locking nuts and remove the
locking screws.
2. Move the wheel to its new position.
3. Redo all screws and nuts and tighten the screws to a torque of
24 N
×
m.
Loading the cart
As for SL-GSUB cabinets, simply stack the cabinets onto the cart.
As for SL-SUB cabinets, proceed in the same manner and
interconnect the cabinets using their Front and Rear links as
follows:
1. Attach the first cabinet to the cart.
↳Due to the runners on the bottom panel and the
corresponding recesses in the top panel, the cabinets are
already aligned and the Front links will directly extend into
the respective slots of the upper cabinet.
2. Attach the second cabinet.
d&b SL-Series Rigging manual 1.10 en
39
