Care and maintenance
4.1 Transport/storing
During transport ensure the rigging components are not stressed or
damaged by mechanical forces. Use suitable transport cases.
We recommend the use of the d&b E7927 Touring case 2 x AL for
this purpose. The touring case provides specific trays and fixtures
for the AL Flying frame and AL Flying adapter.
Due to their surface treatment the rigging components are
temporarily protected against moisture. However, ensure the
components are in a dry state while stored or during transport.
4.2 Visual and functional inspection
WARNING!
Potential risk of personal injury and/or
damage to material
To eliminate the potential risk of accident due to malfunctioning of
a component, regularly inspect all system components.
Cabinet enclosure
▪ Visual inspection of all fitting plates for obvious damage (e.g.
cracks or corrosion).
▪ Visual inspection of the rear rigging strand for obvious damage
(e.g. cracks, deformation or corrosion) including all drilled holes
of the component.
▪ Inspection of all fitting plates including front grills to ensure they
are securely attached.
▪ Regularly lubricate the sockets using WD-40
®
or a similar
product.
Front and Splay links
Visual inspection regarding deformation and damage (e.g. cracks
and corrosion) including all drilled holes of the component.
Locking pins
▪ Visual inspection for deformation, cracks and corrosion of the
component.
▪ Inspection for missing ball bearings and damage.
▪ Functional inspection of the release mechanism to ensure it
operates properly.
▪ Regularly lubricate the Locking pins using WD-40
®
or a similar
product.
Z5456 AL Flying adapter
Visual inspection regarding deformation and damage (e.g. cracks
and corrosion) including all drilled holes of the component.
E7927 Touring case 2 x AL
4 Care and maintenance
d&b Z5456 Rigging manual 1.1 en
16
