Two Horizontal brackets (Z5043) with Bracket connector (Z5044)
WARNING!
4 MAX cluster - built using a total of four
MAX Horizontal brackets (Z5043)
and four MAX Bracket connectors (Z5044)
(3.0E)
Z5044
Z5044 MAX Bracket connector
The Bracket connector allows the creation of MAX cabinet clusters
for flying. The connectors are used between a pair of Z5043
Horizontal brackets and provide a choice of seven mounting holes
for attaching rigging via an E6507 1t Shackle. Each pair of MAX
Horizontal brackets linked together requires a pair of Bracket
connectors.
If no additional cabinets or rigging are attached to the bottom
connector, then the connector can be hidden between the brackets -
turned 180° from the position indicated in the illustration below.
Load safety information
The maximum cluster size per rigging point should be restricted to a
total of four MAX cabinets using four Horizontal brackets and four
Bracket connectors. Care should be taken to ensure that the load
acts directly in the plane of the connector avoiding any shear
loading.
